Pavilion Kit 1 Option B
Pavilion Kit 1 Option B is a GluLam Pavilion with a mega rib metal roof. The pavilion kit comes with structural calculations and state-sealed drawings. A variety of colors are available for the fascia, beams, tongue-and groove, columns, and roof colors. We also provide a natural color scheme for the pavilions.
To order the Pavilion Kit 1B, please email email@example.com or call (801) 414-1724.
Below are the items included in Pavilion Kit 1 Option B. This includes the metal roofing and LED lighting components. However, you can choose not to have the LED lighting package supplied by Smith Steelworks.
|Steel Columns||5x5x3/16″ Square Posts with 12″x12″ Base Plate welded to the bottom and a 5″ wide and 5″ deep saddle welded to the top for holding the Glulam Beams. Finish: Sandblast to SSPC 5/NACE “WHITE FINISH”, Epoxy Prime and Powder Coat in a Super Durable TGIC Polyester Top Coat.||16|
|3/4″ x 24″ Galvanized Steel Embed||3/4″x24″ Bent Anchor Bolt – Bolt and 2 Nuts for Mounting the Steel Posts to the Concrete. If not required, deduct from pavilion cost.||64|
|Glulam Beam 30′||30′ Glulam Beams designed for 43 psf Ground Snow/34 psf Roof Snow Loads. With Transparent Stain.||8|
|Roofing T&G 2″x8″ x 18′||52|
|Pavilion T&G 2″x8″ x 16′||76|
|Pavilion T&G 2″x8″ x 10′||52|
|Pavilion T&G 2″x8″ x 8′||52|
|Kynar 500 Fascia Wrap||210 Feet of Fascia Wrap.||210|
|Lumber 2″x6″ x 16′||12|
|Lumber 2″x6″ x 20′||2|
|T&G Nails (Box)||GR 21D 3-1/4″ x .131 BRT Smith PLST 4M QTY: 4000/Box.||1|
|Lighting Package||See below for component breakout. If not required, deduct from cost of pavilion.||1|
|Metal Roofing Package Components||See below for component breakout.||1|
|Wet Stamp Drawings||State-sealed, site-adapted drawings and structural calculations.||1|
LED Lighting Package Components
|COOPMISC||HAL – APHDVT-232 METALUX APHDVT-232, 4′ Fixtures||16|
|3161148||Rectangular Box 4-1/2” Holes Grey.||5|
|2476220||Metal In Use Multi Mac Cover.||5|
|3273764||Slim 20A 125V Slim TR GFCI.||4|
|593625||4-Hour cycle, no-hold, automatic shut-off, Intermatic #FF34F or equal by Paragon or Tork.||4|
|989831||Sylvania 32W 48” Lights.||32|
|167236||Conduit 1/2” QTY in Feet.||150|
|109450||Conduit Elbow 1/2”.||1|
|156009||12 GA Black Wire Qty in Feet.||500|
|156029||12 GA White Wire Qty in Feet.||500|
|156064||12 GA Green Wire Qty in Feet.||500|
Metal Roofing Kit Components
|Mega Rib Roofing||Mega Rib 7.2 Panel SP Group 26 ga x 38-7/8″ Cut to Length. QTY is in Linear Foot. Kynar 500 Coated.||640|
|Mega Rake Trim||26 GA x 10’3″ Kynar 500 Coated.||7|
|Mega Simple Eave Trim||26 GA x 10’3″ Kynar 500 Coated.||30|
|Ridge Cap||IT Ridge Cap 26 GA x 10’3″ Kynar 500 Coated.||7|
|Closure Mega Rib x36″ (Blank)||Seals ends of Mega Rib to keep bugs out.||147|
|Roll Tape 3x32″ x 1″ x 45′ Gray||Tape to Seals Metal Roof Panel Joints.||39|
|Sikalastomer 511 Butyl Tube Sealant||Glue for sealing the Closure Mega Rib.||5|
|1/4-14x7/8″ Lap Self Driller||Self-Tapping Screws pre-coated to match Mega Rib color for going into steel.||600|
|#10-15 x 1-1/2″ Woodgrip Hilo||Screws for Mega Rib going into wood.||1200|
|1/4-14 x 7/8″ Lap Self Driller||Self-Tapping Screws pre-coated to match Mega Rib color for going into steel.||400|
|43D POP Rivet STST||Pop Rivets for Mega Rib.||500|
|Underlayment||Feltbuster Synthetic 1000SQFT.||2|
What is the total lead time for Pavilion Kit 1 Option B?
Expect eight to ten weeks from the time the purchase order is received.
What are the finishes for the wood and metal?
Semi-transparent wood stain is used on the tongue-and-groove and wood beams. The steel columns are sandblasted (to a white finish), primed, and powder coated (Super Durable TGIC polyester top coat). This three-step process will provide the pavilion with a 30+ year lifespan.
Is the cost of freight included in the pavilion price?
No, the pavilion price does not include the cost for freight. When ordering, please request a quote for a freight.
What are the responsibilities of the GC?
The GC is responsible for scheduling the delivery date, unloading the pavilion kit materials, and making note of any damage to the freight before signing the bill of lading.
Choose your pavilion kit colors from the options below. This includes: fascia, tongue-and groove deck, beams, columns, and metal roof.